User Manual, Window Treatment:

The Following Instructions will explain the use of Venco Marine, window treatment.
Application, Step 1:
Clean the Window surface clean of dirt, salt, etc. Before applying the
Venco Marine, Window Polish & stain Remover

Application, Step 2:
Apply Venco Marine, Window Polish & Stain Remover to the Window Surface, and spread it out evenly on the Glass Surface.



Application, Step 3:
Start Buffing the Glass surface using Manual or Electrical Buffing equipment.
Note: Always keep the polish moist during buffing.

Manual used on newer windows, White Pads.

Electrical Machine necessary on old glass use white or red pads.

The Buffing Pads
White Pads Regular Duty, Gives a good result on New windows.

Red Pads Heavy Duty best result on older windows.

Application, Step 4:
After the buffing is completed clean off the wet polish with water.

1. Clean off the wet polish with a Squeegee.

2. If the polish have dried use water & soap.

3. Use a dry cloth to clean off any water residue or polish spots that is left on the Surface after the cleaning.

Application, Step 5:
Apply the Polymer Protection

1. Spray the polymer onto a Clean rag.

2. Apply the polymer to the glass surface, use a side to side motion, and make sure the polymer is worked well in to the glass, allow to dry until a slight haze appears, re-apply in order to make sure the whole window is protected.

3. The haze comes off with water or a dry cloth.

4. Never use high pressure cleaner on a treated surface.